The Job logo

What

Where

Sign in

Engineer, Process (Stamping)

ApplyJoin for More Updates

You must Sign In before continuing to the company website to apply.

Smart SummaryPowered by Roshi
We are looking for a skilled Process Engineer to join our team. Your main responsibility will be the development and improvement of processes for new product development and mass production. You will work closely with the machine and tooling engineers to ensure quality and productivity goals are met. Additionally, you will troubleshoot any issues that arise during the production process and collaborate with the production and quality teams to continuously improve efficiency and reduce costs.

Your Job

development  of process for new product & continue improvement process for mass production.

Take charge of  Tool & equipment process engineering to make sure of the operation  achieving quality, productivity and output goals.

 

What You Will Do

Development process to setup new product, launching new product.

- Design process, workflow, PFMEA for product.

- Co-operate with machine, tooling engineer to review machine, jig tool design.

- Co-operate with machine engineer to do trial process for new machine, jig tool, set up transfer line...

- Build detail requirement & co-operate with outside supplier to design machine jig, tool for new product

- Build operation instructions for production line, machine setting condition document

- Mass trial run & mass production machine readiness preparation. Continue follow up the production feedback after MP running.

- Apply ECN to machine design 

 

- Study, research new technology to apply to production machine, equipment  

Trouble shooting & problem solving for all related issue of quality, technical due to machine, tool assembly on production line during the trial & pre-MP phase

- Troubleshooting to ensure the operation of equipment, machine & tool. Diagnose, analyze for trouble, error arising on production

- Act for customer claim related to production process

Continue improvement for quality up, productivity up & reduce production cost

- Co-operate with machine engineer, production & quality team to improve capability, ability & performance of current MP equipment, machine, tool

- New product process design feedback to solve current chronic issue (quality & productivity) related process

Support to supplier to solve issue during setup or trial new process
 

Who You Are (Basic Qualifications)

- Minimum 5 years of Work experience in manufacture company in Stamping Function ( experience working in Bruderer and Yamada machines ) 

- Be able to read technical drawings

- Good knowledge of Injection molding and/or over molding processes, scientific molding process

- Be able to use CAD (NX, ...)

- Being good at Office SW (MS Word, excel, Power point) 

- Confidentiality, initiative, accountability, carefulness, honesty,

- Willing to learn & sharing knowledge

- Good communication and analytic skills, interpersonal skills

- Exposure QMS including ISO /IATF 16949 & EHS ISO 14000, ISO 45000

Set alert for similar jobsEngineer, Process (Stamping) role in Bengaluru, India
Molex Logo

Company

Molex

Job Posted

a year ago

Job Type

Full-time

WorkMode

On-site

Experience Level

3-7 Years

Category

Engineering

Locations

Bengaluru, Karnataka, India

Qualification

Bachelor

Applicants

Be an early applicant

Related Jobs

Molex Logo

Supervisor, Stamping

Molex

Bengaluru, Karnataka, India

Posted: a year ago

Your Job Overall responsible for Handling the production in stamping department. Responsible for productivity, quality, resource utilization, raw material accountability, trouble shooting and continual improvements in stamping.  Training and development of subordinates/stamping team members on stamping process and optimization.  Adherence to QMS, EHS & EMS requirements,   Responsible for productivity, resource utilization and compliance to the procedures during shift supervision. Resposnible for inculcating PBM culture among team members.   What You Will Do Ensure compliance to QMS /EMS, driving continual improvement plans and CA. Ensure QMS & EHS Policies are understood throughout the department Develop and maintain SOPs, WIs, Formats required for the department, along with the team Identifying improvement opportunities in processing and strive for excellence Provide on the job training to his team. Coordinate with HR for training. Implement Do’s & Don’ts per IATF .ISO 9000 and ISO 14000 standards. Any other projects/work assigned by management Maintain & protect the Informations & data. To carry out SAP transaction in production module & monitor the same when delegated to SAP document controller /subordinates Ensure adherance to the 6S and safety practices in the plant during shift supervision Ensure optimal utilization of resources in stamping and strive to exceed the department objectives. Ensure proper and continous communication with teammates and adress the concerns ontime with the support from management  Do material reconciliation in stamping, as required To review daily die requirements with die-maintenance. Arrange RM & consumables as planned Who You Are (Basic Qualifications) Graduate/Diploma in any Engineering Discipline like Mechanical, Production, Tool & Die Making Min 5- 6 yrs. of experience with 3 yrs. in stamping  What Will Put You Ahead Knowledge in Connector manufacturing process Thorough knowledge about stamping machines and auxiliary equipment,  stamping process, process optimization. Able to set up machine & auxiliaries and load/unload the dies independently  Fair Knowledge about Die Making and maintenance  Knowledge on Quality System ISO 9000 and ISO 14000  Product quality / measurement techniques Development of PFMEA, control plan and deployment within  team knowledge about HIRA study, EMPs  Etc.. Training & Mentoring skills SAP or equivalent MRP system with good understanding of batch management module. Basic SPC technique and its application Skilled in shop floor/maintenance performance monitoring Knowledge on Lean manufacturing tools & techniques Systematic problem solving technique, like PDCA, 8D Good Communication and presentation skill

Molex Logo

Engineer, Process (Molding)

Molex

Bengaluru, Karnataka, India

Posted: a year ago

Join us in the role of Job Title, where you will be responsible for the development and improvement processes for new products and mass production. You will ensure that all operations achieve quality, productivity, and output goals. Your main tasks will include designing processes, co-operating with engineers, building operation instructions, troubleshooting issues, and offering support to suppliers. Basic qualifications for this role include experience in manufacturing and molding as a molding process engineer, ability to read technical drawings, knowledge of injection molding and/or over molding processes, proficiency in CAD and Office software, and good communication and analytic skills. You should also have a strong work ethic, be willing to learn and share knowledge, and be familiar with quality management systems and safety standards.

Molex Logo

Process Engineer , Assembly

Molex

Bengaluru, Karnataka, India

Posted: a year ago

Development of process for new product & continue improvement process for mass production. Take charge of Tool & equipment process engineering to make sure of the operation achieving quality, productivity and output goals.

Molex Logo

Plating Process Engineer (R&D)

Molex

Bengaluru, Karnataka, India

Posted: a year ago

Molex Material Science and Process Technology Group is seeking a Plating Engineer (R&D) to join our team based out of Bangalore, India. This individual will be working closely with the process and material teams globally (US-SE Asia) to electrochemically characterize in-house plating chemistries, develop new plating alloys for superior performance, and troubleshoot in-line plating operations for a wide range of products. Ideal candidate is a smart, quick, positive, and confident collaborator.

Molex Logo

Engineer PCB Design

Molex

Bengaluru, Karnataka, India

Posted: a year ago

Engineer PCB Design role at Molex, Bengaluru, Karnataka, India. Responsible for new product development, sustaining engineering, product testing, technical documents, and engineering changes. Enhance PCB design process, provide technical support, review board designs, and coordinate with global teams. Automation of PCB layout design, adherence to quality standards, and collaboration with internal and external stakeholders. Full-time, On-site opportunity requiring a B.E./B.Tech degree in Electrical or Electronics Engineering with 3+ years of experience in high-speed PCB design.

Molex Logo

Engineer, Tool Design

Molex

Bengaluru, Karnataka, India

Posted: a year ago

The tool designer is responsible for collaborating with stakeholders to support 3D, 2D, and other design activities in mold design. Responsibilities include developing drawings, attending technical visits, supporting continuous improvement projects, and making technical and financial decisions. The position requires knowledge of injection molding and experience in CAD tool design. Strong interpersonal and communication skills, organizational skills, and computer skills are also necessary. Willingness to travel and work overtime may be required.