The Job logo

What

Where

Engineer III, Electrical

ApplyJoin for More Updates

You must Sign In before continuing to the company website to apply.

Smart SummaryPowered by Roshi
Implement sophisticated electrical projects, interpret electronic component specifications, collaborate with cross-functional teams, design schematic circuit boards, conduct VAVE study, and ensure regulatory compliance. Full-time onsite opportunity at Thermo Fisher Scientific in Hyderabad, Telangana, India.

Job description 

Role & Responsibilities:

Own & implement technically sophisticated electrical projects,

Document and interpret specifications of electronic components.

Provide design solutions and perform tradeoff analysis to comply the product requirements.

Build the design documents for design review (HLD, DFMEA, requirements traceability matrix etc.), and verification plan mapping to the key performance & reliability requirement.

Verify the design performance to meet the requirement, aligns with the Manufacturability and Serviceability, and achieve the cost/reliability target.

Collaborate closely with mechanical engineering team to build product enclosures with compelling design and form-factors that also meet regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements.

Collaborate closely with the firmware engineering team members to build efficient hardware/firmware partitions that meet functional requirements and cost goal.

To work with the sourcing team and the supplier to coordinate the manufacturing and provide detailed requirement for FCT of PCBA to make sure the PCBA from production line can meet design requirement.

Good knowledge on the compliance requirement & support product regulatory compliance testing.

Work with cross function team to understand customer requirement, participate in system / subsystem design review, finalize electronics design requirement by reviewing with systems & global engineering teams.

Design schematic of digital, mix signal & power electronics circuit board that satisfied the design requirement.

Must be able to work on multiple simultaneous projects, tasks & programs to suit business needs.

Train, mentor and develop technical capability of team members.

Perform VAVE study and identify cost out opportunities which are quality neutral.

Minimum Qualifications:

Master’s or bachelor’s degree in electrical/Electronic engineering, or equivalent.

10+ years of experience HW design and development. Also, should have shown strength in working with system/software/Firmware/hardware/ Electrical requirements development and validation.

Experience in embedded system design with 8/16/32-bit microprocessor design

Excellent understanding of analog, digital and power supply design fundamentals.

Solid understanding of embedded systems firmware development for sensors & control application algorithm developments.

Proficient with phase gate / technical review process

Prior experience with cost take out/VAVE methodologies.

Fair knowledge with knowledge of EMC/EMI, CCC, UL, RoHS

Proficient in debugging instruments (digital oscilloscopes, logic analyzers, spectrum analyzers)

The candidate must be flexible, pro-active and willing to learn and chip in to meeting team objectives.

Strong analytical and problem-solving skills.

Excellent interpersonal and presentation skills.

Exhibit to 4i value and open to diverse culture.

Set alert for similar jobsEngineer III, Electrical role in Hyderabad, India
Thermo Fisher Scientific Logo

Company

Thermo Fisher Scientific

Job Posted

8 months ago

Job Type

Full-time

WorkMode

On-site

Experience Level

8-12 Years

Category

Technology

Locations

Hyderabad, Telangana, India

Qualification

Bachelor or Master

Applicants

Be an early applicant

Related Jobs

Thermo Fisher Scientific Logo

Engineer III, Electrical

Thermo Fisher Scientific

Hyderabad, Telangana, India

Posted: a year ago

Role Purpose Summary: The Hardware Engineer III is a professional level member of a global R&D Team. The role is of a hands-on Electrical/Electronic engineer who is motivated & technically competent of the new product design and update of existing products. The person will play key role in demonstrating engineering knowledge to assist team in its PCBA Risk Mitigation strategy. Job Title: Engineer III, Electrical Hardware Roles & Responsibilities: As part of a multi-functional development team, major responsibility will include driving PCBA Risk mitigation strategy and execution of projects for Electronics commodities on product level. Responsible for technical delivery of all Electrical & Electronics related projects. Review designs and concepts from the team to ensure the technical quality of actions. Own & Implement technically sophisticated projects right from scoping to implementation Should have good knowledge on the compliance requirement & should support product regulatory compliance testing. Proficient to synthesise specifications of electronic components into product fitment. Work with cross function team to understand customer requirement, participate in system / subsystem design review, finalize electronics design requirement by reviewing with systems & global engineering teams Design schematic of digital, mix signal & power electronics circuit board that satisfied the design requirement Agility to work on multiple simultaneous projects, tasks & programs to suit business needs Provide Plan A, Plan B. Drive design options & tradeoff analysis meeting diverse product requirements. Build the design documents for design review (HLD, DFMEA, requirements traceability matrix etc.), and verification plan mapping to the key performance & reliability requirement. Verify the design performance qualifying requirements, meeting Manufacturability and Serviceability, and achieve the cost/reliability target. Collaborate with multi-domain teams assisting product development meeting regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements. To work with the sourcing team and the supplier to coordinate the manufacturing and provide detailed requirement for FCT of PCBA to make sure the PCBA from production line can meet design requirement. Train, mentor and enhance technical capability of team members Skills and Proficiencies: Excellent understanding of Electrical and Electronics Engineering fundamentals Ability to drive decision through design and simulation tools. Mentor different tools and intent with hands-on experience Can conceptualize design architectures & identify challenges in designs. Applies self-learning to derive component functioning Independently conceptualize and run design calculations to prove design Collaborate & drive concepts, trade off analysis and leads component selection to meet the technical specifications Lead and drive design analysis and simulation ensuring design optimization and confirmation to requirements Conduct testing as per test plans (including functional and regulatory test cases). Record test results Capture Schematic based on design document and input. Build design documents & artifacts as per design process Ability to optimally work on the below tasks with mentorship Preferred Qualifications: Bachelor’s degree in Electrical / Electronic Engineering with proven track of over 10 years Knowledge of any Circuit design and Simulation tools. Handle medium to high complexity projects independently with ability to provide mentorship to early talent. Build work breakdown structure (WBS) of projects with support from senior project managers Engage with project multi-functional teams for reviews to seek inputs under the guidance of Program & design managers Desirable: Exposure to Project Management C/C++ Embedded Programming Knowledge on FPGA based Design and programming using HDL

Thermo Fisher Scientific Logo

Hardware Engineer - III

Thermo Fisher Scientific

Hyderabad, Telangana, India

Posted: a year ago

Role Purpose Summary: The Hardware Engineer III is a professional level member of a global R&D Team. The role is of a hands-on Electrical/Electronic engineer who is motivated & technically competent of the new product design and update of existing products. The person will play key role in demonstrating engineering knowledge to assist team in its PCBA Risk Mitigation strategy. Job Title: Engineer III, Electrical Hardware Roles & Responsibilities: As part of a multi-functional development team, major responsibility will include driving PCBA Risk mitigation strategy and execution of projects for Electronics commodities on product level. Responsible for technical delivery of all Electrical & Electronics related projects. Review designs and concepts from the team to ensure the technical quality of actions. Own & Implement technically sophisticated projects right from scoping to implementation Should have good knowledge on the compliance requirement & should support product regulatory compliance testing. Proficient to synthesise specifications of electronic components into product fitment. Work with cross function team to understand customer requirement, participate in system / subsystem design review, finalize electronics design requirement by reviewing with systems & global engineering teams Design schematic of digital, mix signal & power electronics circuit board that satisfied the design requirement Agility to work on multiple simultaneous projects, tasks & programs to suit business needs Provide Plan A, Plan B. Drive design options & tradeoff analysis meeting diverse product requirements. Build the design documents for design review (HLD, DFMEA, requirements traceability matrix etc.), and verification plan mapping to the key performance & reliability requirement. Verify the design performance qualifying requirements, meeting Manufacturability and Serviceability, and achieve the cost/reliability target. Collaborate with multi-domain teams assisting product development meeting regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements. To work with the sourcing team and the supplier to coordinate the manufacturing and provide detailed requirement for FCT of PCBA to make sure the PCBA from production line can meet design requirement. Train, mentor and enhance technical capability of team members Skills and Proficiencies: Excellent understanding of Electrical and Electronics Engineering fundamentals Ability to drive decision through design and simulation tools. Mentor different tools and intent with hands-on experience Can conceptualize design architectures & identify challenges in designs. Applies self-learning to derive component functioning Independently conceptualize and run design calculations to prove design Collaborate & drive concepts, trade off analysis and leads component selection to meet the technical specifications Lead and drive design analysis and simulation ensuring design optimization and confirmation to requirements Conduct testing as per test plans (including functional and regulatory test cases). Record test results Capture Schematic based on design document and input. Build design documents & artifacts as per design process Ability to optimally work on the below tasks with mentorship Preferred Qualifications: Bachelor’s degree in Electrical / Electronic Engineering with proven track of over 10 years Knowledge of any Circuit design and Simulation tools. Handle medium to high complexity projects independently with ability to provide mentorship to early talent. Build work breakdown structure (WBS) of projects with support from senior project managers Engage with project multi-functional teams for reviews to seek inputs under the guidance of Program & design managers Desirable: Exposure to Project Management C/C++ Embedded Programming Knowledge on FPGA based Design and programming using HDL

Thermo Fisher Scientific Logo

Hardware Engineer III

Thermo Fisher Scientific

Hyderabad, Telangana, India

Posted: a year ago

Role Purpose Summary: The Hardware Engineer III is a professional level member of a global R&D Team. The role is of a hands-on Electrical/Electronic engineer who is motivated & technically competent of the new product design and update of existing products. The person will play key role in demonstrating engineering knowledge to assist team in its PCBA Risk Mitigation strategy. Job Title: Engineer III, Electrical Hardware Roles & Responsibilities: As part of a multi-functional development team, major responsibility will include driving PCBA Risk mitigation strategy and execution of projects for Electronics commodities on product level. Responsible for technical delivery of all Electrical & Electronics related projects. Review designs and concepts from the team to ensure the technical quality of actions. Own & Implement technically sophisticated projects right from scoping to implementation Should have good knowledge on the compliance requirement & should support product regulatory compliance testing. Proficient to synthesise specifications of electronic components into product fitment. Work with cross function team to understand customer requirement, participate in system / subsystem design review, finalize electronics design requirement by reviewing with systems & global engineering teams Design schematic of digital, mix signal & power electronics circuit board that satisfied the design requirement Agility to work on multiple simultaneous projects, tasks & programs to suit business needs Provide Plan A, Plan B. Drive design options & tradeoff analysis meeting diverse product requirements. Build the design documents for design review (HLD, DFMEA, requirements traceability matrix etc.), and verification plan mapping to the key performance & reliability requirement. Verify the design performance qualifying requirements, meeting Manufacturability and Serviceability, and achieve the cost/reliability target. Collaborate with multi-domain teams assisting product development meeting regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements. To work with the sourcing team and the supplier to coordinate the manufacturing and provide detailed requirement for FCT of PCBA to make sure the PCBA from production line can meet design requirement. Train, mentor and enhance technical capability of team members Skills and Proficiencies: Excellent understanding of Electrical and Electronics Engineering fundamentals Ability to drive decision through design and simulation tools. Mentor different tools and intent with hands-on experience Can conceptualize design architectures & identify challenges in designs. Applies self-learning to derive component functioning Independently conceptualize and run design calculations to prove design Collaborate & drive concepts, trade off analysis and leads component selection to meet the technical specifications Lead and drive design analysis and simulation ensuring design optimization and confirmation to requirements Conduct testing as per test plans (including functional and regulatory test cases). Record test results Capture Schematic based on design document and input. Build design documents & artifacts as per design process Ability to optimally work on the below tasks with mentorship Preferred Qualifications: Bachelor’s degree in Electrical / Electronic Engineering with proven track of over 10 years Knowledge of any Circuit design and Simulation tools. Handle medium to high complexity projects independently with ability to provide mentorship to early talent. Build work breakdown structure (WBS) of projects with support from senior project managers Engage with project multi-functional teams for reviews to seek inputs under the guidance of Program & design managers Desirable: Exposure to Project Management C/C++ Embedded Programming Knowledge on FPGA based Design and programming using HDL

Thermo Fisher Scientific Logo

Embedded FPGA Engineer III

Thermo Fisher Scientific

Hyderabad, Telangana, India

Posted: a year ago

Role Purpose Summary: The FPGA Engineer - III is a member of a global R&D Team. The role is of a hands-on Electrical/Electronic engineer who is motivated to actively improve value of the new design and update of existing products. The person will play key role in designing & implementing the systems, be involved from idea to product launch/update and own the design aspects and address all technical challenges including regulatory certifications. Roles & Responsibilities Conceptualize, analyze & implement system design and programmable part (FPGA/CPLD) design from selecting parts to subsystem design Perform reviews on design concepts, component selections, trade off analysis and resolve technical challenges Work with cross function team to gather requirements, perform system / subsystem design. Finalize electronics design requirement by reviewing with systems & global engineering teams. Provide design options & tradeoff analysis ensuring compliance to requirements Build and review the design documents and verification plan mapping to all the requirements including key performance & reliability requirements. Ensure the design performance to meet the design objectives, efficient in aspects of Manufacturability and Serviceability, and achieve the cost/reliability target. Work with multi-functional team to ensure design and form-factors meet regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements.. Continuously learns and grow technical depth and knowledge across product lines. Candidate Educational & Professional Experience Requirement: Masters or Bachelor’s degree in Electrical/Electronics engineering, or related field or equivalent. Over 10+ years of robust experience in hardware design and development in embedded system design with 8/16/32-bit microprocessor design Proficiency Requirements Must Have: Mixed-Signal Design Experience, Microprocessor / FPGA Experience Expert in using the FPGA development tools including synthesis, place and route, simulation, timing closure and debug tools. Experience in Memory Interface, High Speed Ethernet, USB and other communication protocols Excellent understanding of PCB design, electronic schematics, and their functionalities Consistent track record in developing and debugging sophisticated instrumentation systems and firmware (controls, sensors, automation, robotics, firmware, device communication, etc.) Proficient in scripting, debugging, optimization tools, and unit testing Experience in Verilog/ VHDL, code optimization & reducing latency Experience in use of existing IPs or develop something totally from scratch Strong understanding in alternate design analysis/part substitute for cost out ideas and obsolescence management including design analysis for quality, reliability, power consumption, timing parameters etc. Should have good knowledge on the compliance requirement & should support product regulatory compliance testing including EMC/EMI, CCC, UL, RoHS, etc. Proficient in debugging instruments (digital oscilloscopes, logic analyzers, spectrum analyzers); Experience in practices for Design for Test (DFT), DFR and Design for Manufacturing (DFM) background. Strong analytical and problem-solving skills and interpersonal skills. In-depth knowledge of Software & Firmware Engineering principles Agility to work on multiple simultaneous projects, tasks & programs to suit business needs Desirable Experience with cost take out/VAVE methodologies and Phase gate process C/C++ Embedded Programming